LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2003 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P1294: Target Idle Not Reached >> Monitored & Set Conditions
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Monitored & Set Conditions

Engine speed is monitored with engine idling, transmission in Drive (A/T), and no Manifold Absolute Pressure (MAP) or Throttle Position (TP) sensor DTCs present. DTC will set if engine idle is not within 200 RPM above or 100 RPM below target idle for 14 seconds. Three separate failures are required to set a bad trip. Two bad trips are required to set DTC.

scientia non olet · About LEMON Manuals