Hard Wired Inputs
WARNING: This page is about a different car, the 2002 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
The hard wired inputs to the BCM include the following:
- A/C on/off control
- Ambient temperature sensor signal
- Body control module flash enable
- Door lock switch MUX
- Driver door ajar switch sense
- Flip-up glass ajar switch sense
- Flip-up glass release switch sense
- Fog lamp switch sense
- Front wiper park switch sense
- Front wiper switch MUX
- Front washer pump driver
- Fused B+
- Fused ignition switch output (run-acc)
- Fused ignition switch output (run-start)
- Headlamp switch MUX
- High beam switch sense
- Hood ajar switch sense (premium with VTSS) in markets where required only
- Key-in ignition switch sense
- Left cylinder lock switch sense (premium with VTSS only) omitted in some markets as required
- Panel lamps dimmer switch MUX
- Passenger door ajar switch sense (input from 3 ajar switches connected in parallel)
- Radio control MUX (premium with remote radio switches only)
- Rear courtesy lamp control
- Rear window defogger control
- Rear wiper intermittent driver
- Rear wiper on driver
- Right cylinder - lock switch sense (premium with VTSS only) omitted in some markets as required
- RKE antenna (2 circuits) premium with RKE only
- Tailgate ajar switch sense
- Tailgate cylinder lock switch sense
- Vehicle speed sensor