Torque Specifications
MANUAL A/C TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Compressor Mounting Bolts (2.4L) | 21 (28) | |
| A/C Compressor Mounting Bolts (4.0L) | ||
| Compressor-To-Block | 33-48 (45-65) | |
| Rear Brace-To-Compressor | 30-41 (40-55) | |
| Discharge Support Bracket To Compressor | 21 (28) | |
| Suction & Discharge Line Manifold To Compressor | 18 (25) | |
| INCH Lbs. (N.m) | ||
| Accumulator Retaining Band Screws | 40 (4.5) | |
| A/C-Heater Control Panel Screws | 20 (2.2) | |
| Blend Door Actuator Screw | 10 (1) | |
| Blower Motor Resistor Block Screw | 20 (2.2) | |
| Blower Motor Switch Screw | 20 (2.2) | |
| Center Panel Duct Screws | 20 (2.2) | |
| Compressor Shaft Bolt | 115 (13) | |
| Discharge Line To Condenser Nut | 106 (12) | |
| End Panel Duct Screw | 20 (2.2) | |
| Evaporator Tube Clamp Screw | 20 (2.2) | |
| Floor Distribution Duct | 20 (2.2) | |
| HVAC Housing Outboard Screw | 30 (3.4) | |
| HVAC Housing Screw | 20 (2.2) | |
| HVAC Housing Stud Nut | 55 (6.2) | |
| Lower Condenser Bracket Screw | 20 (2.2) | |
| Main Panel Duct Screw | 20 (2.2) | |
| Radiator Shroud Screw | 71 (8.0) | |
| Recirculation Housing Screw | 20 (2.2) | |
| Suction Lines To Accumulator Nut | 20 (2.2) | |
| Upper Condenser Mounting Bracket Screw | 20 (2.2) | |
| Vacuum Reservoir Screw | 20 (2.2) | |