October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Battery Tray: Installation
- Clean and inspect the battery tray (Refer to CLEANING
) and (Refer to INSPECTION
).
- Position the battery tray onto the reinforcement in the engine compartment.
- Install and tighten the four screws with washers that secure the battery tray to the reinforcement located between the dash panel and the rear of the front wheelhouse inner panel in the engine compartment. Tighten the screws to 22.6 N.m (200 in. lbs.).
- Install the battery temperature sensor onto the battery tray (Refer to BATTERY TEMPERATURE SENSOR
).
- Install the battery onto the battery tray (Refer to INSTALLATION
).