LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2005 >> Wrangler SE, 4.0 S, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Linkage >> Pitman Arm >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pitman Arm: Installation

  1. Align and install the pitman arm on steering gear shaft.
  2. Install the washer and nut on the shaft and tighten the nut to 251 N.m (185 ft. lbs.).
  3. Install drag link ball stud to pitman arm. Install nut and tighten to 81 N.m (60 ft. lbs.). Install a new cotter pin.
scientia non olet · About LEMON Manuals