LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Distribution >> Power Outlet >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Outlet: Installation

  1. Connect the instrument panel wire harness connector to the cigar lighter or power outlet receptacle base connector receptacle.
  2. Install the cigar lighter or power outlet mount into the instrument panel.
  3. Align the splines on the outside of the cigar lighter or power outlet receptacle base connector receptacle with the grooves on the inside of the mount.
  4. Press firmly on the cigar lighter or power outlet receptacle base until the retaining bosses of the mount are fully engaged in their receptacles.
  5. Install the cigar lighter knob and element into the cigar lighter receptacle base, or the protective cap into the power outlet receptacle base.
  6. Connect the battery negative cable.
scientia non olet · About LEMON Manuals