LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System (Service Information) >> Front Suspension >> Stabilizer Bar >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Stabilizer Bar: Installation

Fig 1: Stabilizer Bar Bracket To Frame
GC0026759Courtesy of DAIMLERCHRYSLER CORP.
1 - STABILIZER BAR
2 - RETAINER BRACKET
3 - BUSHING
  1. Install the stabilizer bar (1) to the vehicle.
  2. Install the stabilizer bushing clamp (2) and tighten the bolts to 129 N.m ( 95 ft. lbs.).
    Fig 2: Identifying Stabilizer Link, Tie Rod End & Clevis Bolt
    GC0026784Courtesy of DAIMLERCHRYSLER CORP.
  3. Install the upper stabilizer link (3) and tighten nut (1) & bolt (2) to 108 N.m (80 ft. lbs.).
  4. Install the front splash shield.
  5. Lower the vehicle.
scientia non olet · About LEMON Manuals