LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2006 >> Commander Base, 4.7 N, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Fuel System) >> Fuel Injection - Gas >> Sensor-Map >> Installation >> 5.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injection - Gas: Sensor-Map: Installation: 5.7L

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: MAP Sensor Location - 5.7L
GC0013147Courtesy of DAIMLERCHRYSLER CORP.
  1. Clean MAP sensor mounting hole at intake manifold.
    Fig 2: Removing/Installing MAP Sensor - 5.7L
    GC0006596Courtesy of DAIMLERCHRYSLER CORP.
  2. Check MAP sensor o-ring seal for cuts or tears.
  3. Position sensor into manifold (2). See Fig 2.
  4. Rotate sensor 1/4 turn clockwise for installation (3). See Fig 2.
  5. Connect electrical connector.