October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Accelerator Pedal: Installation
- Place accelerator pedal assembly over mounting studs protruding from floor pan. Tighten mounting nuts to 8.5 N.m (75 in. lbs.) torque.
- Slide throttle cable into opening (slot) in top of pedal arm. An index tab is located on pedal arm. Rotate and push plastic cable retainer (clip) into accelerator pedal arm opening until it snaps into place on index tab.
- Before starting engine, operate accelerator pedal to check for any binding.