LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander 4WD V6-3.7L VIN K >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - HVAC >> Blower Motor Relay >> Service and Repair >> Controls - Rear >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation






INSTALLATION





1. Position the rear blower motor relay (2) into the proper receptacle of the junction block (JB) (1) located in the passenger compartment.

2. Align the blower motor relay terminals with the terminal cavities in the JB receptacle and push down firmly on the relay until the terminals are fully seated.

3. Install the steering column opening cover.

4. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals