LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Base, 3.7 K, 4WD >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> Nag1 Automatic Transmission - Electrical Diagnostics >> Nag1 - Electrical Diagnostics >> DTC Troubleshooting >> P0602-Control Module Programming Error/Not Programmed >> Possible Causes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Possible Causes

Possible Causes 
CONTROLLER NOT CODED
TRANSMISSION CONTROL MODULE

Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. See NAG1 PRE-DIAGNOSTIC TROUBLESHOOTING PROCEDURE .