LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Base, 3.7 K, AWD >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection - Diesel >> Solenoid - Fuel Quantity >> Removal >> Fuel Control Solenoid
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel Control Solenoid

Fig 1: Identifying Fuel Quantity Solenoid And Fuel Temperature Sensor
GC0039525Courtesy of CHRYSLER LLC
1 - LOW PRESSURE FUEL SUPPLY
2 - RETURN FUEL
3 - HIGH PRESSURE SUPPLY TO FUEL RAIL
4 - FUEL TEMPERATURE SENSOR
5 - FUEL QUANTITY SOLENOID
6 - HIGH PRESSURE FUEL PUMP
  1. Disconnect the negative battery cable.
  2. Disconnect the fuel quantity solenoid wiring harness connector.
  3. Remove the solenoid fasteners and remove the solenoid. See Fig 1.
scientia non olet · About LEMON Manuals