LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Base, 4.7 P, AWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Ignition System (Service Information) >> Ignition System - Service Information >> Relay-Auto Shut Down >> Removal >> Automatic Shutdown (ASD) Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Automatic Shutdown (ASD) Relay

The ASD relay is located in the engine compartment within the Power Distribution Center (PDC). Refer to label on PDC cover for relay location.

  1. Remove PDC cover.
  2. Remove relay from PDC.
  3. Check condition of relay terminals and PDC connector terminals for damage or corrosion. Repair if necessary before installing relay.
  4. Check for pin height (pin height should be the same for all terminals within the PDC connector). Repair if necessary before installing relay.
scientia non olet · About LEMON Manuals