LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Overland, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules >> Module-Final Drive Control >> Operation >> Modes Of Operation >> Limp-In Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Limp-In Mode

This mode is entered when the FDCM has detected an error condition that prevents the system from performing its' required task. The FDCM operation will vary depending from modified operation to total system shut down based on the failure that has occurred.

scientia non olet · About LEMON Manuals