LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Overland, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules >> Module-Transmission Control >> Standard Procedure >> Drive Learn - 4.7L/5.7L Vehicles >> Learn A Smooth 2-3 And 3-4 Upshift
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Learn A Smooth 2-3 And 3-4 Upshift

NOTE: The transmission oil temperature must be above 43° C (110° F).

Use the following steps to have the TCM learn the OD and 4C CVI's.

  1. Accelerate the vehicle from a stop at a steady 15 degree throttle opening and perform multiple 1-2, 2-3, and 3-4 upshifts. The 2nd 2-3 shift following a restart or shift to reverse will be shown during the shift as a value between the 1st 2-3 OD CVI and the normal OD CVI. Updates to the normal OD CVI will occur after the 2nd shift into 3rd gear, following a restart or shift to reverse.
  2. Repeat step  1 until the 2-3 and 3-4 shifts become smooth and the OD and 4C CVI become stable.
scientia non olet · About LEMON Manuals