LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Overland, 4WD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Electronic Control Modules >> Standard Procedure >> SKREEM Programming >> ECM/Skim/WCM Programming >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ECM/Skim/WCM Programming: Notes

When a ECM and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new SKIM
  2. Program the new ECM
  3. Replace all ignition keys and program them to the new SKIM.

When an ECM (Bosch) and the SKIM are replaced at the same time perform the following steps in order:

  1. Program the new SKIM
  2. Program the new ECM (Bosch)
  3. Replace all ignition keys and program them to the new SKIM.
scientia non olet · About LEMON Manuals