LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Commander Overland, RWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection - Diesel >> Sensor-Crankshaft Position >> Removal >> Crankshaft Position Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor

Fig 1: Locating Crankshaft Position Sensor
GC0039518Courtesy of CHRYSLER LLC
1 - HEAT SHIELD
2 - CRANKSHAFT POSITION SENSOR
  1. Disconnect the negative battery cable.
  2. Raise and support the vehicle.
  3. Remove the crankshaft position sensor heat shield (1). See Fig 1.
  4. Disconnect the crankshaft sensor wiring harness connector.
  5. Remove the bolt and sensor (2).
scientia non olet · About LEMON Manuals