LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Wrangler Sahara, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Fuel System) >> Fuel Delivery - Gas >> Standard Procedure >> Fuel System Pressure Release
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Fuel System Pressure Release

WARNING: This page is about a different car, the 2007 Dodge Nitro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove fuel fill cap.
  2. Remove fuel pump fuse from Totally Integrated Power Module (TIPM). For location of fuse, refer to label on underside of TIPM cover.
  3. Start and run engine until it stalls.
  4. Attempt restarting engine until it will no longer run.
  5. Turn ignition key to OFF position.
  6. Place a rag or towel below fuel line quick-connect fitting at fuel rail.
  7. Disconnect quick-connect fitting at fuel rail. See STANDARD PROCEDURE .
  8. When the repair is complete, return fuel pump fuse to TIPM.
  9. One or more Diagnostic Trouble Codes (DTC's) may have been stored in PCM memory due to fuel pump fuse removal. A diagnostic scan tool must be used to erase a DTC.
scientia non olet · About LEMON Manuals