LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2007 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Service and Repair >> Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation






INSTALLATION




1. Install the TRS (2) to the manual shaft. Make sure TRS locating pin rests in manual valve bore slot.
2. Install the TRS/manual shaft retaining screw (1) and torque to 5 Nm (45 in. lbs.) torque.




3. Install the manual shaft seal (1).
4. Install valve body to the transmission.
scientia non olet · About LEMON Manuals