September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Sensor-Engine Coolant Temperature: Installation: Installation-3.7L

Fig 1: Manifold Absolute Presure Sensor / Ect Sensor - 3.7L

GC0028735

Courtesy of CHRYSLER LLC

1 - MOUNTING SCREWS

2 - MAP SENSOR

3 - ECT SENSOR

4 - FRONT OF INTAKE MANIFOLD

Apply thread sealant to sensor threads.
Install sensor to engine.
Tighten sensor to 11 N.m (8 ft. lbs.) torque.
Connect electrical connector to sensor.
Replace any lost engine coolant. See STANDARD PROCEDURE .