LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2008 >> Commander Base, 4.7 N, AWD >> Repair and Diagnosis >> Engine Performance >> System >> DTCS P0016 To P0125, Pre-Diagnostic Troubleshooting Procedure, Intermittent Condition >> P0125-Insufficient Coolant Temperature For Closed-Loop Fuel Control >> Additional Wiring
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Additional Wiring

For complete wiring diagrams refer to SYSTEM WIRING DIAGRAMS article.

The engine coolant temperature sensor is a negative temperature coefficient thermistor-type sensor whose resistance varies inversely with temperature. At cold temperatures the sensor resistance is high so the voltage is high. As the coolant temperature increases the resistance decreases and the voltage becomes low. The INSUFFICIENT COOLANT TEMP FOR CLOSED-LOOP FUEL CONTROL determines if the engine coolant temperature will reach the closed loop fueling control temperature limit in a regulated time after start.