April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation-Gas Engine

Fig 1: WATER PUMP - WORLD ENGINE

GC0053127

Courtesy of CHRYSLER LLC

1 - WATER PUMP

2 - MOUNTING BOLT

3 - WATER INLET TUBE NUTS

4 - INLET WATER TUBE

Position water pump assembly (1) and gasket onto cylinder block.
Position water inlet tube (4) and gasket onto water pump (1).
Install mounting bolts (2). Tighten bolts to 25.5 N.m (225 in. lbs.).
Install drive belt splash shield.
Lower vehicle.
Install accessory drive belt. See INSTALLATION .
Fill cooling system. See STANDARD PROCEDURE .