LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Ignition Control (Service Information)) >> PLUG, Glow >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PLUG, Glow: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install glow plug. Tighten glow plugs to 12 Nm (106 lbs. in.).
  2. Connect glow plug electrical connector (1).
  3. Install engine cover. Refer to Engine - Installation .
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals