LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2010 >> Commander 4WD V6-3.7L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - Transfer Case >> Control Module >> Service and Repair >> Final Drive Control Module - Installation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Final Drive Control Module - Installation






INSTALLATION





1. Place the final drive control module (3) in its location on the mounting plate (2) and firmly snap into place.
2. Connect the electrical connector (1).





3. Lower the rear seat back down into position.
4. Connect the battery negative cable.

scientia non olet · About LEMON Manuals