LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Transmission Control >> Standard Procedure >> Standard Procedure - Transmission Control Module Initialization >> Relearn, After Replacing A Transaxle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relearn, After Replacing A Transaxle

  1. Turn ignition key to RUN.
  2. Clear learning memory using the scan tool.
  3. Turn the ignition key to OFF/LOCKED for 2 seconds.
  4. Turn the ignition key to RUN Clear DTCs.
  5. Turn the ignition key to OFF/LOCKED for 2 seconds.
  6. Turn ignition key to RUN.
  7. After at least 7 seconds, read DTCs.
  8. If DTCs resets. Refer to DIAGNOSIS AND TESTING .
scientia non olet · About LEMON Manuals