LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Universal Transmitter >> Standard Procedure >> Erasing Transmitter Codes
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Erasing Transmitter Codes

NOTE:

Individual channels (buttons) cannot be erased. Erasing the transmitter codes will erase ALL programmed codes.

To erase programming from the three transmitter buttons:

  1. Press and hold the two outer HomeLink® buttons until the indicator light begins to flash (about 20 seconds). Do not hold the buttons for longer that 30 seconds.
  2. Release both buttons.
  3. HomeLink® is now in the train (or learning) mode and can be programmed at any time using the Programming standard procedure. Refer to STANDARD PROCEDURE .
scientia non olet · About LEMON Manuals