Programming HOMELINK® Transceiver Codes: Notes
Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run the engine while training the universal transmitter. Failure to follow these instructions may result in possible serious or fatal injury.
Your motorized door or gate may open and close while you are training the universal transmitter if the vehicle is in range of the motorized device. Do not train the universal transmitter if people or pets are in the path of the door or gate. A moving door or gate can cause serious injury or death to people and pets or damage to objects.
When programming a garage door opener, it is advised to park outside the garage. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to the HomeLink® transceiver for quicker training and accurate transmission of the radio-frequency signal.
If programing the HomeLink® transceiver is unsuccessful using the following procedure, refer to the Owner's Manual for the current customer assistance phone number.