LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Electronic Control Modules (Service Information)) >> MODULE, Powertrain Control >> Removal >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

MODULE, Powertrain Control: Removal: Removal

WARNING: This page is about a different car, the 2009 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: PCM LOCATION - LEFT HAND DRIVE
GC0085923Courtesy of CHRYSLER LLC
NOTE: Right hand drive PCM is in a different location (shown in illustration).
  1. The PCM (Powertrain Control Module) (3-Left Hand Drive), or (3-Right Hand Drive) is located in the engine compartment.
  2. Disconnect negative battery cable.
  3. Disconnect PCM electrical connectors (4-Left Hand Drive), or (5-Right Hand Drive).
  4. Remove PCM mounting screws (5-Left Hand Drive), or (4-Right Hand Drive).
  5. Remove PCM (3-Left Hand Drive), or (3-Right Hand Drive) from vehicle.

Right hand drive location: 

scientia non olet · About LEMON Manuals