Radiator, Engine Cooling: Removal: 3.6L

WARNING: This page is about a different car, the 2015 Chrysler 300. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 3.6L .
Drain cooling system. Refer to STANDARD PROCEDURE .
Remove upper radiator hose.
Remove cooling fan assembly. Refer to FAN, COOLING, REMOVAL .
Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .

Fig 1: Lower Engine Cover & Front Air Shield
Courtesy of CHRYSLER GROUP, LLC
Remove the lower engine cover.

Fig 2: Lower Radiator Hose
Courtesy of CHRYSLER GROUP, LLC
Remove lower radiator hose (1).
Lower the vehicle.
Remove the front bumper fascia. Refer to FASCIA, FRONT, REMOVAL .

Fig 3: Air Deflectors
Courtesy of CHRYSLER GROUP, LLC
Remove the air deflectors (1).

Fig 4: Upper Radiator Mounting Brackets Bolts
Courtesy of CHRYSLER GROUP, LLC

CAUTION:
Bolts are installed with threadlocker. Use hand tools to remove the upper radiator mounting bolts.
Remove bolts (3) and the upper radiator isolator (1).

Fig 5: Support Bolt
Courtesy of CHRYSLER GROUP, LLC
Remove the lower condenser mounting bolts.
Remove the bolt (2) located between the cooler lines.
Using a suitable hanger. Support the condenser and remove the right side upper mounting bolt.
Separate condenser assembly from radiator.
Tilt radiator toward engine and remove radiator from vehicle.