Heater, Engine Block: Installation: 5.7L/6.2L/6.4L
WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
- Thoroughly clean the cylinder block core hole and the block heater seat.
- Insert the block heater assembly (2) into the engine block.
- Tighten the bolt (3) to the proper specification. Refer to SPECIFICATIONS .
- Connect the power cord to the block heater.
- Install the belly pan. Refer to BELLY PAN, INSTALLATION .