LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2012 >> Compass Limited, AWD, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 510 (Engine Cooling System) >> Engine >> Radiator, Engine Cooling >> Removal >> 3.6L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radiator, Engine Cooling: Removal: 3.6L

WARNING: This page is about a different car, the 2016 Dodge Charger and 2015 Dodge Charger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable.
  2. Remove the air cleaner body. Refer to BODY, AIR CLEANER, REMOVAL, 3.6L .
  3. Drain the cooling system. Refer to STANDARD PROCEDURE .
  4. Remove the upper radiator hose.
  5. Remove the cooling fan assembly. Refer to FAN, COOLING, REMOVAL .
  6. Raise and support the vehicle. Refer to HOISTING, STANDARD PROCEDURE .
  7. Remove bolts (1) and the belly pan.
    Fig 1: Lower Radiator Hose
    GC0095212Courtesy of CHRYSLER GROUP, LLC
  8. Remove the lower radiator hose (1).
  9. Remove support and lower the vehicle.
  10. Remove the front fascia. Refer to FASCIA, FRONT, REMOVAL .
    Fig 2: Upper Radiator Mounting Brackets & Bolt
    GC0144643Courtesy of CHRYSLER GROUP, LLC
    CAUTION:

    Bolts are installed with threadlocker. Use hand tools to remove the upper radiator mounting bolts.

  11. Remove the bolts (3) and the upper radiator isolator (1).
    Fig 3: Support Bolt
    GC0144644Courtesy of CHRYSLER GROUP, LLC
  12. Remove the lower condenser mounting bolts.
  13. Remove the bolt (2) located between the cooler lines.
  14. Using a suitable hanger. Support the condenser and remove the right side upper bolt.
  15. Separate the condenser assembly from radiator.
  16. Tilt the radiator toward engine and remove the radiator from vehicle.
scientia non olet · About LEMON Manuals