Wireless Ignition Node Receiver - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.

NOTE: Passenger side shown, drivers side similar.

2. Remove the drivers scuff plate Scuff Plate - Removal.
3. Remove the drivers cowl trim panel Cowl Trim Panel - Removal.
4. Remove the drivers side silencer pad.
5. Remove the steering column opening cover Steering Column Opening Cover - Removal.





6. Remove the right side knee blocker support bracket.
7. Remove the instrument cluster Instrument Cluster - Removal.
8. Through instrument cluster opening, remove the upper Wireless Ignition Node (WIN) bracket retainer.





9. From the steering column opening remove the two lower WIN bracket retainers one on the bottom and one on the side (1).
10. Pull the WIN (2) and bracket down through the steering column opening.
11. Disconnect the antenna and electrical connector.