Section 15 (6.4L - Intermittent Condition, Pcm/ECM Reprogramming - Gas, Powertrain Verification Test & Pre-Diagnostic Troubleshooting Procedure)

• Standard Procedure
  • Intermittent Condition
    • Diagnostic Test
  • Pcm/ECM Reprogramming - Gas
    • Pcm/TCM Flash Reprogramming
    • Table Of Contents
    • Section 1 - Pcm/TCM Flash Procedure
    • Repair Procedure - Using WITECH™ Diagnostic Application
    • Repair Procedure - Using STARMOBILE® Desktop Client
    • Section 2 - Additional Pcm/TCM Replacement Procedures
      • Notes
      • If an NGC3 or NGC4 PCM was replaced, perform the following additional steps and/or routines:
      • If a GPEC PCM was replaced, perform the following additional steps and/or routines:
      • If a CVT TCM was replaced, perform the following additional steps and/or routines:
      • If an EGS TCM was replaced, perform the following additional steps and/or routines:
    • Step-By-Step Instructions
    • Section 3 - Authorized Modification Label
    • Required Tools/Equipment:
    • Tech Tips And Information:
    • Parts Required
  • Powertrain Verification Test
    • Notes
    • Diagnostic Test
  • Pre-Diagnostic Troubleshooting Procedure
    • Diagnostic Test