Heater, Engine Block: Installation: 2.4L
WARNING: This page is about a different car, the 2016 Dodge Journey and 2015 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RETAINING CLIP |
| 2 - BLOCK HEATER |
CAUTION:
To prevent damage, the power cord must be secured in it's retaining clips, and not positioned so it could contact linkages or exhaust manifold.
- Thoroughly clean the engine block heater bore.
- Install the engine block heater (2) and the retainer clip (1). Make sure retaining clip (1) is engaged.
- Connect the power cord to the engine block heater (2).
- Remove the support and lower the vehicle.