Heater, Engine Block: Installation: 2.4L
WARNING: This page is about a different car, the 2014 Dodge Journey. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - RETAINING CLIP |
| 2 - BLOCK HEATER |
CAUTION:
To prevent damage, the power cord must be secured in it's retaining clips, and not positioned so it could contact linkages or exhaust manifold.
- Thoroughly clean block heater bore.
- Insert block heater assembly. Make sure retaining clip engages on cylinder block.
- Connect power cord to heater.
- Lower vehicle.