Diagnostic Test

CHECK FOR SQUIB RELATED DTCS
1. Turn the ignition on.
2. With the scan tool, read the Occupant Restraint Controller (ORC) DTCs.
  Is there any squib related DTCs present?
  
  Yes
  - Diagnose specified squib DTCs according to procedure in article before diagnosing this DTC.
  - Refer to the OCCUPANT RESTRAINT CONTROLLER (ORC) - DIAGNOSTIC CODE INDEX article and perform the appropriate diagnostic procedure.
  No
  
  WARNING:
  Turn the ignition off, disconnect the 12-volt battery and wait two minutes before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.
  
  WARNING:
  If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to follow these instructions may result in possible serious or fatal injury.
  - Replace the ORC in accordance with the Service Information.
  - Perform the OCCUPANT CLASSIFICATION MODULE SYSTEM VERIFICATION TEST. Refer to STANDARD PROCEDURE .