LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2013 >> Compass Limited, AWD, Trans Mfr CD CVT2L >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Exhaust Temperature Sensor >> Installation >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Exhaust Temperature Sensor: Installation: Installation

Fig 1: Identifying Downstream Temperature Sensor
GC0138491Courtesy of CHRYSLER GROUP, LLC
  1. Install the Exhaust Gas Temperature (EGT) sensor (2). Tighten sensor to 25 N.m (221 in. lbs.).
  2. Connect the EGT sensor wire harness connector.
  3. Install the engine cover.
  4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals