LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2013 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Transmission Control Module (TCM) - Electrical Diagnostics) >> DTC Troubleshooting >> P0602-Control Module Programming Error/Not Programmed >> Possible Causes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Possible Causes

WARNING: This page is about a different car, the 2012 Jeep Wrangler. However, it is still accessible from the selected car via links, so may be relevant.
Possible Causes 
CONTROLLER NOT CODED
TRANSMISSION CONTROL MODULE (TCM)

Always perform the NAG1 Pre-Diagnostic Troubleshooting procedure before proceeding. Refer to  STANDARD PROCEDURE  .