LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2013 >> Wrangler Rubicon, Standard Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.8L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Coolant Temperature: Installation: 2.8L

WARNING: This page is about a different variant/trim than selected.
Fig 1: Lower Bypass Hose, EGR Cooler Supply Line & Temperature Sensor
GC0145356Courtesy of CHRYSLER GROUP, LLC
  1. Install coolant temperature sensor (4) in thermostat housing (1). Tighten sensor (4) to 11 N.m (97 in. lbs.).
    Fig 2: Thermostat Housing
    GC0145357Courtesy of CHRYSLER GROUP, LLC
  2. Install the thermostat housing (2) onto engine. Refer to THERMOSTAT, INSTALLATION .
scientia non olet · About LEMON Manuals