LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2014 >> Cherokee Sport, AWD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Universal Transmitter >> Standard Procedure >> Reprogramming Universal Transmitter Codes >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogramming Universal Transmitter Codes: Notes

WARNING:

Vehicle exhaust contains carbon monoxide, a dangerous gas. Do not run the engine while training the universal transmitter. Failure to follow these instructions may result in possible serious or fatal injury.

WARNING:

A motorized door or gate may open and close while you are training the universal transmitter if the vehicle is within range of the device. Do not train the universal transmitter if people or pets are in the path of the door or gate. Failure to follow these instructions may result in possible serious or fatal injury.

NOTE:

When programming a garage door opener, it is advised to park outside the garage. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to the universal transmitter for quicker training and accurate transmission of the Radio Frequency (RF) signal.

NOTE:

If programing the universal transmitter is unsuccessful using the following procedure, refer to the Owner's Manual for the current customer assistance phone number.