Radiator, Engine Cooling: Removal: 2.4L

Disconnect the battery negative cable.
Remove the engine cover.
Raise the vehicle.

Fig 1: Removing/Installing Belly Pans
Courtesy of CHRYSLER GROUP, LLC
Remove the lower belly pan.
Drain the cooling system. Refer to STANDARD PROCEDURE .

Fig 2: Push Pins, Side Close Out Deflector & Lower Deflector
Courtesy of CHRYSLER GROUP, LLC
Separate the lower air deflector (2).
Separate the lower radiator hose at the radiator.

Fig 3: Upper Close Out Panel Cover Components
Courtesy of CHRYSLER GROUP, LLC
Remove the upper close out panel cover (1).

Fig 4: Side Air Deflectors & Upper Radiator Closeout Panel
Courtesy of CHRYSLER GROUP, LLC
Separate the side air deflectors from the upper radiator closeout panel.

Fig 5: Removing/Installing Upper Air Deflector
Courtesy of CHRYSLER GROUP, LLC
Disconnect the cooling fan module harness connector (4).
Disconnect the ambient air temperature sensor (5).
Disconnect the horn electrical connectors (6).
Remove the hood release cable (3) from the air deflector.
Remove the wiring harness (7) from the air deflector.
Remove the upper air deflector (1).

Fig 6: Removing/Installing A/C Fill Port Support Bracket
Courtesy of CHRYSLER GROUP, LLC
Remove the A/C fill port support bracket (2) and position aside.

Fig 7: Removing/Installing Transmission Cooler Line Support Bracket Bolt
Courtesy of CHRYSLER GROUP, LLC
Separate the transmission cooler line support brace bolt (1).

Fig 8: Radiator & Bolt
Courtesy of CHRYSLER GROUP, LLC
Separate the condenser from the radiator (1).

Fig 9: Removing/Installing Upper Radiator Mounts
Courtesy of CHRYSLER GROUP, LLC
Separate the upper radiator hose from the upper cross over pipe.
Remove the upper radiator mounts (1).
Disconnect the electrical connector at the cooling fan module.
Remove the radiator from the vehicle.
Remove the radiator fan assembly.