Torque Specifications - Gas
2.4L
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Accessory Drive Belt Tensioner Bolt | 26 | 19 | - |
| Block Heater | 2 | - | 21 |
| Condenser to Radiator | 8 | - | 70 |
| Coolant Reservoir | 8 | - | 70 |
| Coolant Return Tube to Water/Coolant Pump Inlet Pipe | 45 | 33 | - |
| Coolant Return Tube to Oil Filter Housing | 40 | 30 | - |
| Coolant Supply Tube to Oil Filter Housing | 9 | - | 80 |
| Coolant Supply Tube to Thermostat Housing | 9 | - | 80 |
| Engine Coolant Temperature (ECT) Sensor | 20 | 15 | - |
| Fan Shroud to Radiator Mounting | 8 | - | 70 |
| Radiator Lower Isolator Bracket to Crossmember | 8 | - | 70 |
| Thermostat Housing | 10 | - | 89 |
| Water/Coolant Pump Bolts and Nut | 10 | - | 89 |
| Water/Coolant Pump Inlet Tube | 9 | - | 80 |
| Water/Coolant Pump Inlet Pipe Support Bracket Bolt | 10 | - | 89 |
3.2L
| DESCRIPTION | N.m | Ft. Lbs. | In. Lbs. |
|---|---|---|---|
| Accessory Drive Belt Tensioner Bolt | 50 | 37 | - |
| Block Heater | 12 | - | 106 |
| Condenser to Radiator | 8 | - | 70 |
| Coolant Reservoir | 10 | - | 89 |
| Coolant Return Tube to Oil Filter Housing | 40 | 30 | - |
| Coolant Supply Tube to Oil Filter Housing | 9 | - | 80 |
| Cross Over to Front Cover | 12 | - | 106 |
| Engine Coolant Temperature (ECT) Sensor | 30 | 22 | - |
| Idler Pulley Bolt | 27 | 20 | - |
| Radiator Lower Isolator Bracket to Crossmember | 8 | - | 70 |
| Thermostat Housing | 12 | - | 106 |
| Water/Coolant Pump Bolts | |||
| M6 | 12 | - | 106 |
| M8 | 23 | 17 | - |