Adding Additional Coolant

WARNING:

ANTIFREEZE IS AN ETHYLENE GLYCOL BASE COOLANT AND IS HARMFUL IF SWALLOWED OR INHALED. IF SWALLOWED, DRINK TWO GLASSES OF WATER AND INDUCE VOMITING. IF INHALED, MOVE TO FRESH AIR AREA. SEEK MEDICAL ATTENTION IMMEDIATELY. DO NOT STORE IN OPEN OR UNMARKED CONTAINERS. WASH SKIN AND CLOTHING THOROUGHLY AFTER COMING IN CONTACT WITH ETHYLENE GLYCOL. KEEP OUT OF REACH OF CHILDREN. DISPOSE OF GLYCOL BASED COOLANT PROPERLY. CONTACT YOUR DEALER OR GOVERNMENT AGENCY FOR LOCATION OF COLLECTION CENTER IN YOUR AREA. DO NOT OPEN A COOLING SYSTEM WHEN THE ENGINE IS AT OPERATING TEMPERATURE OR HOT UNDER PRESSURE; PERSONAL INJURY CAN RESULT. AVOID RADIATOR COOLING FAN WHEN ENGINE COMPARTMENT RELATED SERVICE IS PERFORMED; PERSONAL INJURY CAN RESULT.

2.4L - Coolant will normally be in the pressure chamber side of the coolant bottle. If additional coolant is to be added, use the indicators on the bottle as a guide. If the bottle was empty, perform the Deaeration procedure to properly remove any trapped air in the cooling system. Refer to STANDARD PROCEDURE .

3.6L - When additional coolant is needed, it should be added to the Pressurized Coolant Bottle. With the engine cold, add enough coolant to set the level between the add and full indicators on the bottle.

For the proper type of coolant. Refer to CAPACITIES AND RECOMMENDED FLUIDS, DESCRIPTION .