LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2015 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> (Transmission Control Module (TCM) - Electrical Diagnostics - 6F24 Automatic Transmission) >> Standard Procedure >> 6F24 TCM Programming Procedure >> Programming The Transmission Control Module (TCM)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming The Transmission Control Module (TCM)

NOTE:

While performing the TCM programming procedure, the vehicle battery must be maintained between 10 and 16 volts. Ambient temperature must be between 0° C (32° F) 60° C (140° F). Vehicle must be in Park with brake pedal depressed.

  1. Using the scan tool and Dealer Connect, download the appropriate TCM flash file to the scan tool.
  2. Ignition on, engine not running.
  3. Vehicle in park with the brake pedal depressed.
  4. Following the menu on the scan tool, program the TCM.
  5. Clear any stored DTCs.
  6. Road test the vehicle above 40 m.p.h. for at least two minutes.
  7. With the scan tool, select View DTCs in the TCM.

    Are there any DTCs present?

    Yes 

    • Perform the appropriate diagnostic procedure(s).

    No 

scientia non olet · About LEMON Manuals