LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2015 >> Compass Limited, AWD, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.8L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Coolant Temperature: Installation: 2.8L

WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Thermostat Housing
GC0145357Courtesy of CHRYSLER GROUP, LLC
  1. Install coolant temperature sensor in thermostat housing. Tighten sensor to 11 N.m (8 ft. lbs.) torque.
  2. Install the thermostat housing onto engine. Refer to THERMOSTAT, INSTALLATION .
scientia non olet · About LEMON Manuals