Sensor, Coolant Temperature: Removal: 2.8L
WARNING: This page is about a different car, the 2012 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Do not remove or loosen the coolant pressure/vent cap, cylinder block drain plugs, or the draincock when the system is hot and under pressure because serious burns from the coolant can occur.
NOTE:
The temperature sensor is located on the thermostat housing. In order to gain access to the sensor. You must remove the thermostat housing.
- Remove the thermostat housing. Refer to THERMOSTAT, REMOVAL .