Sensor, Coolant Temperature: Installation: 3.6L

Fig 1: Coolant Temperature Sensor

Courtesy of CHRYSLER GROUP, LLC

1. Install the Engine Coolant Temperature (ECT) sensor (1) into the thermostat and turn clockwise 1/4 turn to lock in place.
   Fig 2: Lock Tab On Bottom Of ECT

   Courtesy of CHRYSLER GROUP, LLC
2. Verify that the lock tab (1) has properly engaged.
   Fig 3: Coolant Temperature Sensor Connector

   Courtesy of CHRYSLER GROUP, LLC
3. Connect the wire harness connector to the ECT sensor (1).
4. Fill the cooling system. Refer to STANDARD PROCEDURE .
5. Install the air cleaner body. Refer to BODY, AIR CLEANER, INSTALLATION .
6. Connect the negative battery cable.