U1952-83-Message Brake1 Plausibility Error - Value Of Signal Protection Calculation Incorrect

WARNING: This page is about a different car, the 2016 Jeep Renegade. However, it is still accessible from the selected car via links, so may be relevant.

Perform the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE. Refer to STANDARD PROCEDURE .

NOTE:

Treat this DTC as a IMPLAUSIBLE SIGNAL DTC when performing the COMMUNICATION PRE-DIAGNOSTIC PROCEDURE.

NOTE:

This DTC indicates that the Antilock Brake System (ABS) module is not sending the required information over the Controller Area Network (CAN) bus. Therefore, the ABS module is considered to be the "offending module". The "offending module" will be referred to in the COMMUNICATION PRE-DIAGNOSTIC procedure.