Module Programming: 3.0L

WARNING: This page is about a different car, the 2017 RAM ProMaster 3500, 2017 RAM ProMaster 2500, and 2017 RAM ProMaster 1500. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

If a new 3.0L Engine Controller was installed, it must be programmed to the latest available calibration before proceeding.

If a 3.0L Controller was replaced, navigate to "Misc. Functions" and perform all applicable routines:

Is the ECU responsive?
1. Yes - Perform the "ECU Replacement With Value Transfer" and then skip to step #3.
2. No - Perform the "ECU Replacement Without Value Transfer" routine and perform steps #2 and #3.
If the ECU was not responsive, perform the "Injector Quantity Adjustment Reset" routine.
Perform the "SCR DEF Tank Fluid Level" routine.