LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2017 >> Wrangler Rubicon, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Cooling System) >> Engine >> Sensor, Coolant Temperature >> Installation >> 2.4L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sensor, Coolant Temperature: Installation: 2.4L

WARNING: This page is about a different car, the 2017 Jeep Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
GC0156193Courtesy of CHRYSLER GROUP, LLC
  1. Install the coolant temperature sensor (2) and tighten to the proper torque. Refer to TECHNICAL SPECIFICATIONS .
  2. Connect the coolant temperature sensor wire harness connector.
    GC0159726Courtesy of CHRYSLER GROUP, LLC
  3. Install the PCM mount (3) to the battery tray (1).
  4. Install the PCM mount bolts (2 & 4).
  5. Install the PCM

    Refer to MODULE, POWERTRAIN CONTROL (PCM), INSTALLATION .

  6. Install the battery. Refer to BATTERY, INSTALLATION .
  7. Fill the cooling system. Refer to STANDARD PROCEDURE .
  8. Install the engine cover. Refer to the appropriate service information article.
  9. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
scientia non olet · About LEMON Manuals